Causes and countermeasures of insufficient suction of road sweeper
The sweeper is a new type of efficient cleaning equipment integrating road cleaning, garbage collection and garbage transportation. If the suction of the sweeper is not enough, it will lead to dust on the road can not be properly handled, and the peeling paper will also encounter suction difficulties, which will seriously affect the road cleaning work.
If you want to solve the problem of vacuum suction, you must first understand what type of vacuum suction system is, which is an important part of the vacuum cleaner. The suction system usually consists of a motor, pipe and nozzle.
In order to ensure the suction effect, the gap between the nozzle and the air should be kept at a proper interval, usually less than 10cm. If the paste interval is too close, the larger garbage will be discarded, and too far away will not form enough suction. This separation can usually be adjusted by adjusting the height of the rollers on both sides of the nozzle and the other side. The size of sucker parts also directly affects the overall performance of the cleaner.
Next, check the connection and sealing of pipes. If the pipe is damaged by aging or the joint is loose, it will also lead to the problem of insufficient suction. If it is difficult to replace the motor.
To sum up, if the suction effect of the sweeper is not good. You can view the following three details:
1. The distance between the air under the suction nozzle of the cleaner is not appropriate.
Treatment: Adjust the bottom clearance to the appropriate interval.
2. The cleaning machine or fan speed is insufficient
Treatment: Check whether the tightness of the fan is appropriate and adjust to the tightness state. Motor problems should be dealt with or replaced by a maintenance technician.
3. Pipe blockage or leakage.
Treatment method: replace the pipeline or clear the debris in the pipeline, dredge the pipeline.
The weak suction of road sweeper is usually caused by the above reasons. If the above methods cannot solve the problem of poor suction of the cleaner, comprehensive maintenance and after-sales service are needed.
