Sweeper is a new type of efficient sweeping equipment which integrates road sweeping, garbage collection and garbage transportation. If the suction of the sweeper is not enough, it will lead to the dust on the road can not be properly treated, and the peeled paper will encounter suction difficulties, which will seriously affect the road cleaning work.
If you want to solve the problem of insufficient suction of vacuum cleaner, you must first understand what type of suction system of vacuum cleaner is, which is an important part of vacuum cleaner. The suction system is usually composed of motor, pipe and suction nozzle.
In order to ensure the inhalation effect of * *, the gap between the suction nozzle and the air should be kept at an appropriate interval, usually less than 10 cm. If the pasting interval is too close, the larger garbage will be discarded, and if it is too far away, it will not form enough suction. Generally, the interval can be adjusted by adjusting the height of the rollers on both sides of the suction nozzle and on the other side. The size of the suction cup also directly affects the overall performance of the sweeper.
Secondly, check the connection and sealing of the pipeline. If the pipe is aged and damaged or the joint is loose, it will also lead to the problem of insufficient suction. If it is difficult to replace the motor.
To sum up, if the suction effect of the sweeper is not good. You can see the following three details:
1. The distance between the air and the air under the suction nozzle of the sweeper is not appropriate.
Treatment method: adjust the bottom clearance to the appropriate interval.
2. The motor or fan speed of the sweeper is insufficient
Treatment method: check whether the tightness of the fan is appropriate, and adjust it to the tightness state. The problem of the motor should be handled or replaced by the maintenance technician.
3. Pipe blockage or leakage.
Treatment method: replace the pipe or remove the debris in the pipe, dredge the pipe.
The weak suction of road sweeper is usually caused by the above reasons. If the above methods can not solve the problem of poor suction of the sweeper, comprehensive maintenance and after-sales service are needed.
