Industrial vacuum cleaner is used in chemical plants, textile factories, food plants and other factories. For many industries, the use of industrial vacuum cleaner can be used for environmental cleaning, can greatly improve the efficiency of work, but also can save some cost of material recovery for enterprises.
The most common problem in the use of industrial vacuum cleaner is the problem of non suction, that is, the phenomenon of air pipe blockage of vacuum cleaner. This is mainly in use of the time not pay attention to cleaning a few large paper, etc., resulting in the vacuum cleaner blockage can not be vacuum.
First, we know that the principle of vacuum cleaner is that the low pressure area is formed in the dust bag box caused by motor operation. According to the principle of air flow, the internal and external pressure difference is formed. The dust and other sundries are connected by the internal and external pressure difference. The dust and other sundries are successively entered into the dust filter bag through long and curved pipes, hoses and hose joints. After filtering, the air at the tail of the human body is heated when it passes through the gas motor, so the exhaust gas at the tail of the vacuum cleaner is hot.
Let's first look at the cause of the vacuum blockage. Because of the fine dust and strong adhesion, it is easier to adhere to the dust plate, some of which will penetrate the dust separator and stick to the filter element, which will cause air blockage and blockage after a long time.
1. First, see if there is something blocked in the pick of the vacuum cleaner. Because the pick head of the vacuum cleaner is in direct contact with the garbage. Once the object is not suitable for inhalation, it is easy to block. So when the industry person holds the plug of the vacuum cleaner, the time will think of seeing if there is something blocked at the pick, and it should be cleaned in time.
2 next, you can take the industrial vacuum cleaner hose off and check to see if the vacuum cleaner hose is blocked, find the plug and clean it.
3. stop the machine and check if there is too much dust sticking on the filter element. If the filter element is not cleaned or replaced for a long time, it will cause poor ventilation and blockage.
4 check the float position to see if the float ball is stuck in the air inlet, close the machine and clean up the foreign matters around the floating ball.
5. If the dust collecting bucket is too full or the installation position will cause blockage, the garbage can shall be cleaned regularly.
6. If it is a dry and wet industrial vacuum cleaner, check whether it can absorb water without removing the filter element and dust layer, so that the wet filter element is stuck on the dust and causes blockage. In this case, please clean and dry in time.
In addition, when purchasing industrial vacuum cleaner, pay attention to power. The power may be too large because of excessive suction, dust is easy to break through dust separation, and adhere to the filter element. If the motor is inhaled through the filter element for a long time, it will have an impact on the motor; the suction is too small to wash and not clean, so the appropriate power should be selected when selecting industrial vacuum cleaner.
